Instrument introduction:Micro Tester 5882 series test system can perform tensile, compression, bending, creep and cycle tests on all raw materials and finished products. It has the characteristics of high precision, strong durability, and flexibility to adapt to changes in demand, which can improve test efficiency and improve operation convenience. The main advantage of a floor-standing system is the rigidity of the frame, which is especially important when testing high-strength materials such as aerospace composites, metal alloys, and crystalline polymers. Preloaded bearings and precision ball screws, thicker beams and bases, and lower tension transmission belts can minimize the energy stored during the test and obtain more accurate modulus and strain values. It can meet the testing needs of a variety of applications or industries, such as biomedical, automotive, electronics, plastics, metals, composite materials, elastomers, aerospace, textiles, etc.

Technical parameter:

Load                                kN             100

Vertical test space                 mm             1430 (E1) 1930 (E2)

Horizontal test space               mm             575 (F1) 934 (F2)

Test rate range (return rate)    mm/min            0.0001-1016 (1016)

Test speed accuracy: - ±0.1% (set speed)

Position control resolution         nm             9

Displacement measurement accuracy   mm            ±0.01 or 0.05% (whichever is greater)

Axial rigidity of frame             kN/mm         275

Maximum force at full speed         kN            75

Maximum speed at full load        mm/min          762

Height                              cm            227 (E1) 278 (E2)

Width                               cm            113 (F1) 149 (F2)

Depth                               cm            78